1 / 2
120mm HEPA Air Filter for LACK Enclosure Remixed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version of 120mm HEPA Air Filter for LACK Enclosure
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 216
- Wydruki
- 2
- Wyświetlenia
- 2516
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (112)Powiązane
This is a remixed version from 120mm HEPA Air Filter for LACK Enclosure by FlyBy Tom.
Changes in this remix
- The whole filter box can be sandwiched using M3 35mm screws.
- The final hole that receives M3 screw is now a brass insert nut. (M3 x 5 x 4)
- The filter box tolerances have been tuned so the HEPA filter has no gaps.
- The media chamber M3 screw head tolerance is fixed.
- Better fit for the Roomba HEPA filters.
BOM
- 4x Brass inserts M3 x 5 x 4 (Standard voron issue)
- 4x M3 35mm
- Pellet based activated carbon (see original model description)
- 2x Roomba HEPA filters