Tronxy X5SA Z axis crash protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple block in the event the Z motor crashes the nozzle into bed.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
What started out as finding a solution to do a quick alignment of the dual Z motors accidentally became a way to prevent the nozzle from crashing too hard into the bed.
If it doesn't crash too hard, the bed level will not be too skewed and still usable.
Current height works for me with my nozzle and bed setup. Should be pretty easy to change height to suit your setup. I used a single M4x8 screw and M4 T nut to secure this to the 2020 extrusion.
Printed in transparent ABS at 100% infill.
*****
Clicking on my AliExpress affiliate link below will give me a small kickback
if you purchase something within 3 days. (at no extra cost to you)
Affiliate links:
2020 extrusion drop in T-nuts (I use M4)
https://s.click.aliexpress.com/e/_DnnhqWb
Button screws (I use M4x8)