Worker Nightingale Trigger guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trigger guard replacement for the Worker Nightingale so it can use the ZWQ sidearm holster
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 946
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
A straight rip of the ZWQ Firerat/Viper triggerguard, nothing fancy.
I wanted to holster my Nightingale in something that didn't look like Worker only had time to sneeze at before pushing it through production. ZWQ has a much nicer holster for their Firerats and well, I own both so I thought why not just make it fit.
About as low profile as I could make it while retaining functionality.
Print:
I lay the print down sideways, printed fine. Not sure how it would go angled or upright.
Install:
Just unscrew the Nightingale trigger guard screws and slot in. Replace screws, et voila. Should work, but technically still a WIP.
V1.8
Adjusted overall height to fix rubbing issue caused by insufficient clearance between blaster shell and holster