Factorio Belt Keychain and Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small keychain and fidget styled like the belts from Factorio
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 225
- Wydruki
- 4
- Wyświetlenia
- 1614
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
A set of small Factorio styled belts. One 8-segment part has a hole at the end for a keyring and the others makes a great desk fidget toys. The longer ones will likely need to be printed at an angle to fit on the build plate. These are print-in-place with fairly tight tolerances. I printed mine on an Ender 3 V2 with a .4mm nozzle and was able to get them flexing without too much difficulty.
I changed the filament near the top to get the colored arrow. The keyring hole makes the segment a bit high limiting when the filament can be changed for that version but the final effect still looks alright.
Print Details | |
|---|---|
| Layer Height | .16 mm works well in my testing .12mm for the keyring if you want more layers for the colored arrows |
| Infill | 5% Gyroid |
| Filament | Ender Gray PLA, Ender Yellow PLA, Ender Red PLA, Ender Blue PLA |
This is a remix of the Factorio Belt Keychain by Demod. The changes I made were to remove the bars from the ending belt pieces, close the holes in the front of the fidget models, and make some excessively long variants.