Jewish Calendar - Puzzle a day
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hebrew-Calendar version of the traditional puzzle-a-day puzzle. The aim is to solve the puzzle for the current date.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Motivation
I could not find a Jewish-Calendar puzzle a day, so I decided to design one.
It is not really a remix but a variation from the model published by Gadman in his remix of the Puzzle-a-day puzzle remix with bigger numbers/letters. (Based on Will B model Puzzle-a-day puzzle) both are based on the Gregorian Calendar.
A Jewish calendar is also called Hebrew Calendar (HaLuah HaIvri) is based on lunar months, but corrected to follow a solar year. It was developed to help to identify the agriculture events in ancient times and today it is the official calendar used in the state of Israel.
The Hebrew calendar is composed by 12 lunar months with 29-30 days, and adding a complete month every leap year.
Printing the model
The model is very simple, it is composed by a base and 8 puzzle pieces, that need to be placed on top of the engraved calendar, leaving the current day and month name exposed.
Printing the base:
For printing the base it is advised to choose two contrasting colors for the two color changes during the printing at specific layers.
If you print with a layer height of 0.2mm, then:
- The base to be printed in any color until the first color change at the height of 2.6mm, then change to the color that will contrast with the upper part of the base.
- The second color change is at the height of 3.4mm, when you replace the letter color with the upper part of the base that will be visible.
Here it is how do I have set this in Prusa Slicer:
For the color change, I followed the instructions in “Color Change” page of the PrusaSlicer documentation.
The base is printed using my Prusa MINI+ Printer using the following parameters:
| Nozzle: | 0.4mm |
| Layer Height: | 0.2mm |
| Perimeters: | 2 |
| Infill: | Gyroid 15% |
| Supports: | None |
| Filament Type: | eSUN PLA+ (Any PLA or even PETG filament can be used) |
| Material consumed: | 27.3mt (~ 86grams) |
| Estimated Print time: | 6:34:46 |
Files: Calendario-Hebreo-Base.3mf or Calendario-Hebreo-Base.stl.
Printing the pieces:
They can be printed without any special care, they can be single color although I have printed them using a dark color that contrasts the base, you can print all the pieces at once, with the following parameters:
| Nozzle: | 0.4mm |
| Layer Height: | 0.2mm |
| Perimeters: | 2 |
| Infill: | Gyroid 15% |
| Supports: | None |
| Filament Type: | eSUN PLA+ (Any PLA or even PETG filament can be used) |
| Material consumed: | 14.7mt (~ 46grams) |
| Estimated Print time: | 3:50:04 |
Files: Calendario-Hebreo-Piezas.3mf or use the STL files that are:
Calendario-Hebreo-Pieza-A.stl,Calendario-Hebreo-Pieza-B.stl,Calendario-Hebreo-Pieza-C.stl,Calendario-Hebreo-Pieza-D.stl,Calendario-Hebreo-Pieza-E.stl,Calendario-Hebreo-Pieza-F.stl,Calendario-Hebreo-Pieza-G.stlandCalendario-Hebreo-Pieza-H.stl.
Challenge:
You are invited to run a challenge by arming the puzzle every day, it takes around 2-15 minutes, and post the pictures in your social media tagging me (#ricky_marek)
Last Words
- I hope you like this model and if you like it, please give it a like, it will make my day and will allow me to get a Prusa mug.
- Don't hesitate to post your makes including comments that can improve the model.
- You are kindly invited to follow me to get updated every time I upload a new model.
And the most important: Happy printing & Greetings from the Galilee.
Hope it was not TL;DR