Heatset Bit Holder: Skadis-TNut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 5 heatset bits 2-5mm for a Skadis pegboard
- Ocena
- 4,5 / 5
- Polubienia
- 23
- Pobrania
- 62
- Wydruki
- 2
- Wyświetlenia
- 441
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder mounts on a Skadis pegboard using TNuts (2.5mm). It holds 5 heatset insert bits in sizes 2, 2.5, 3, 4, 5 mm. The unit is in two parts allowing you to remove the main holder to take to your work area. The pics above use PETG, but any material can be used. My bits were for a Weller WES51 or Weller 1010, which use the ET style of tips. My tips were 5.5mm in diameter. The Skadis holder section is designed for the M2.5 TNut system but you should be able to drill the holes with a 3mm bit and use the M3 mount system.
I've included the 3mf files for my MK3+ printer which show orientation and support settings.
Heatset Insert bit holder
-----------------------------
0.3 layer, can change color on last 2 layers for text readability
3 perimeters
Skadis holder
----------------
0.2 layer, 3 perimeters
support for the alignment pegs on back
Shrinkage varies by printer and filament. I used 6mm holes to hold my 5.5mm bits.
If anyone has heatset bits of a different size and wants a custom hole size, I can add.
Wanted to give a shoutout to this heatset arm design. Cheap and highly effective. Order the exact arm to keep the solder iron vertical.