Another Mega Bloks Clone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mega Bloks compatible blocks
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 317
- Wydruki
- 2
- Wyświetlenia
- 976
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I started making this for my foster kid who loves these things and I wanted to make her some different/multi colored ones. The other Mega Bloks I found had some issues with thin walls and I wanted more sizes.
The ones I came up with could be refined a bit more by having thinner center walls and removing the bump in between each post but I decided it was good enough for me as they seem to be kid proof and my kid will be able to build higher towers. I have included rectangular sizes from 1x1 through 6x6.
I printed my first ones out of PETG and they are nearly indestructible. I don't use supports and the insides aren't perfect but no one cares about the insides as long as they look good on the outside and they go together.
I included the Fusion 360 save if you want to make your own pattern or bigger blocks. With the rectangular pattern tool set each one 31.5mm apart.