1 / 1
F1 Wheel for G920 - combined wheel plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are 3 files for the wheel plate in the parent thing that if you print the main one face down, can all be…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 1812
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
There are 3 files for the wheel plate in the parent thing that if you print the main one face down, can all be combined into a single print, this is the combined file, set Z-height so that the bump on the bottom is below the bed, then set print height to 14.1mm when using 0.3mm layers for a clean top layer. I printed this at 25% infill.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
25%
Filament: 3D Fillies PETG Black
Category: Video Games