Peripheral Mount Base for YawVR Dome Rim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020-10-03: Updated with better holding capability and screw hole for locking in place. You can use this STL to create…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2020-10-03: Updated with better holding capability and screw hole for locking in place.
You can use this STL to create peripheral mounts that have a friction fit and can slide the rim of the YawVR dome. It is my intention that you could merge this with other geometry to build the final mount.
Rim section at https://www.thingiverse.com/thing:4600231
How I Designed This
I first created the geometry of the rim in Fusion360, then I used Tinkercad to subtract the rim from primitives I used to make the included model. I had to tweak and reprint to get a good friction fit as provided by this STL.
Category: Video Games