1 / 4
Bambu Lab Tall Purge/Flush/Poop bucket for X1 Carbon
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the Bifrost poop bucket, I made the bucket a bit taller so the filaments would fly off easily.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 593
- Wydruki
- 2
- Wyświetlenia
- 2887
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (42)Powiązane
Print instructions:
1. 0.2mm layer height
2. Fill 15%
3. Filament: ABS or PETG
I printed 3 walls which are solid. You can also choose to print 2 walls, but if you add any amount of infill, the item will also be solid. Bucket thickness is 2 mm. Other than that it's just the default.