Ikea LILLABO Concrete mixer top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New top for the modular Ikea car toy: a concrete mixer. Prints with minimal support and just need whatever screw.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 661
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Found the base in a second-hand store, so I made a top myself! It's a truck, which is not available like this at IKEA either.
It's intended to print on the side of the exhaust pipe with support to the build plate only (for the connector pins). That way you should get maximal strength in the pins whilst having minimal cleaning to do afterwards.
The concrete mixer part is printed in 2 pieces (base on the side, barrel standing) and connected with whatever screw you have lying around.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes (to build plate)
Resolution:
Whatever
Infill:
Whatever
Filament: Whatever
Notes:
It's intended to print on the side of the exhaust pipe with support to the build plate only (for the connector pins). That way you should get maximal strength in the pins whilst having minimal cleaning to do afterwards.
Category: Toys & Games