1 / 2
Furniture Anchor (no supports needed) — zdjęcie 1
1 / 2

Furniture Anchor (no supports needed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remove crushing hazards in your home with this printable furniture anchor.

Ocena
5 / 5
Polubienia
19
Pobrania
199
Wydruki
1
Wyświetlenia
1001
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

As always, Use at your own discretion and use common sense. I can make no guarantees on the performance of this anchor, and can't be responsible for anyone's use / misuse.

I designed this furniture anchor back in 2020 to secure some toy bin shelves to the wall so that my son couldn't tip them over and promptly forgot about them. Close to three years later, they have stood up to all the abuse our son has put out.

Use Screws/Wall Anchors to attach one furniture anchor to the wall, and optionally use screws to attach a second anchor to your furniture in a discrete/secure location IF your furniture does not already have a good spot you can attach a zip tie to and you are comfortable putting screws into it. Use zip ties to attach your furniture to the wall so that there is no tension at rest, but not enough slack to tip it. When done properly you should be unable to easily tip the piece of furniture.

I recommend printing in Tough PLA (PLA+), with 100% infill to produce a strong anchor that is unlikely to break with indoor use.

 

 

Tagi