1 / 2
Canon 12x36 IS III eyecup mould — zdjęcie 1
1 / 2

Canon 12x36 IS III eyecup mould

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mould to cast silicone eyecups for Canon 12x36 IS binocular.

Ocena
0 / 5
Polubienia
7
Pobrania
33
Wydruki
0
Wyświetlenia
369
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hi, 

I've created this mould to cast eyecup with silicone. 

It can be printed without supports, just use variable layer height for center part to make layers denser in collar part.

First pour silicone into bottom part, then assemble the mould, add some rubber band to keep it together and fill rest of the space. 

Leave some excess silicone on the top and then cut it when silicone is set.