Hot Glue Gun Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version of the hot glue gun stand.
- Ocena
- 4,947 / 5
- Polubienia
- 191
- Pobrania
- 985
- Wydruki
- 21
- Wyświetlenia
- 3887
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my version of the hot glue gun stand. It was designed for the Arrow mini hot melt glue gun but might work for others as-well.
Inner oval diameter 31mm x 45mm, inner height 80mm
Printing fine with ABS, no raft, no support required.
Update: Second version with glue stick holder for longer glue sessions
Update2: Third version with slightly bigger holes for the sticks. (8mm now)
Print instructions
Category: Hobby Summary
This is my version of the hot glue gun stand. It was designed for the Arrow mini hot melt glue gun but might work for others as-well.
Inner oval diameter 31mm x 45mm, inner height 80mm
Printing fine with ABS, no raft, no support required.
Update: Second version with glue stick holder for longer glue sessions
Update2: Third version with slightly bigger holes for the sticks. (8mm now)
Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%