Sunlu S2 Silica Desiccant dryer tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tray is designed to fit exactly in the sunlu S2, the cut-outs on the bottom ensure a good positioning.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 450
- Wydruki
- 11
- Wyświetlenia
- 4348
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This tray is designed to fit exactly in the sunlu S2, the cut-outs on the bottom ensure a good positioning.
Printing should be done in PETG or other materials that have no problem with temperatures around 70 C. PLA should not be used.
Printing can be done without supports.
The tray has small openings on all sides so that the air can circulate well and the drying process is fast. Unfortunately, printing is a bit time consuming (about 10h) but this depends on your print settings.
The walls are all made with 1.2 mm thickness.
Updated bottom for more strength
Announcement:
There is a new version planned, the sides will no longer be in hole design but in slots, also the spout will be revised so that the overhangs are easier to print and the handling will be easier. So if you are planning to print the design please wait for the new version, it is scheduled for june 10. (sorry for the postponement).