1 / 5
7 inch Backwater Valve Access Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a 7in backwater vlave access cover.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
intro
This is a 7in backwater valve access cover I made to cover the valve access in the basement floor.
The original one that was installed in my house was very thin and my floor is very uneven at that location wich caused the cover to flip out of the hole at the slightest bumb. This resulted in many close calls that could have easily resulted in twisted/broken ankles…
This one is a lot thicker and is very strong and secure once installed.
I added a finger hole for ease of installation/removal.
Printing
Nothing special here,
- print face down
- no supports
- printed mine in PLA
- 0.3mm layers (draft mode)