M-Jump TE-764 Screwdriver Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bench top stand for the M-Jump TE-764 Screwdriver set from Amazon
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Needing some pretty small flat and Phillips screwdrivers to work on my electronics projects, I bought a very inexpensive set from Amazon. Model TE-754 made by M-Jump (obviously Chinese) for less than $9.00. The set has 6 screwdrivers, Three Flat blade with blade size 1.5, 2.0 and 3.0 mm wide as well as 3 Phillips blade of 1.5, 2.0 and 3.0 mm diameter.
I also needed a way to keep them organized. I've done 2 versions of a holder/stand for this screwdriver set. The first version mounts to a shelf on my workbench with wood screws, and can be found by looking for M-Jump TE-764 Screwdriver Holder for shelf mounting.
I'm also printing a version of this holder that will stand upright on a bench or desk top and will post that later once I confirm that the print is good.
Nothing is too critical in the print, use 15-20% infill to save filament and speed up print time and just about any type filament can be used though PLA is totally adequate. I just happened to have some HT-PLA+ by FilaCube on the printer so that's what I used for this.