Badly Steering Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This car doesn't steer well, by design, due to how the steering bars are placed/aligned. CAD files included!
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 1059
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Badly Steering Car
This car doesn't steer well due to how the steering bars are placed/designed. It's by design! Figure out how to fix it, and post a remix. step and slvs (SolveSpace) files included!
Non-printables
This model uses 8 608zz (22mm OD; 8mm ID; 7mm high) bearings, and optionally 2× m3 screws
Printables
None of the parts require supports, but some printers may have problems with stringing on small towers, so one of the parts has two alternatives. The .step files will probably work better for printing because of higher resolution.
- 4× wheel, printable in TPU, but PLA will also work
- 4× bearing-pin
- 2× stearing-bar-pin OR 2× steering-bar-hole
- 1× base-plate