Massca M1 Pocket Hole Jig Accessory Holder (also fits Trend branded model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An accessory holder for the Massca M1 pocket hole jig. Also fits the Trend branded pocket hole jig.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Massca M1 has an included bit depth adjustment tool which is easy to lose. This part is designed to slot into the base of the tool and hold the adjustment tool as well as the included allen wrench.
Support required on build plate only.
Recommended support settings for easy to remove supports:
Top contact Z distance: 0.25mm
XY separation between object and support: 75%
Pattern Spacing: 3mm
Top interface layers: 4
Interface pattern sapcing: 0.2mm
Printed on a MK3S with PETG, 0.4mm nozzle and 0.15mm layer height.