Monstrocities
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi all!! Prepare your 2kg spools and the CR10 printers!! This is a mashup of two previous generative designs (see…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Hi all!!
Prepare your 2kg spools and the CR10 printers!!
This is a mashup of two previous generative designs (see remix source files)
Before i publish the finished Openscad script and a collection of 'ready to print' STLs i want to share with you those3 big procedural cities that i made while testing the algorithm.
I said big as they are huge and i don't recommend scaling down as you lose lot of details but scaling up is always great!!
See pictures below for dimensions.
Cover picture is from City #1. +80 hours print made by @FilamentFrenzy show him some love!! :)
Check that epic video from Joel Telling (The 3d Printing Nerd Youtube Channel) : https://youtu.be/ewiwe_qrBoA
Eventually i will update with new pictures when makers finished their prints!
Hope you enjoy the models!!
Have fun!!
Print Settings
Supports:
No
Resolution:
0.2-0.3
Infill:
15-20%
Notes:
I recommend using 3 perimeters, 3 tops/bottoms. Infill required, a 15-20% infill it's ok.
If you're using Cura slicer i recommend 'Gradual Infill' options to save a lot of material and time.Models size
Category: Math Art