Ice Tower + Coal Fortress
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi! After hours rendering on OpenSCAD and a more hours printing here you got two figures generated with the Futuristic…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Hi!
After hours rendering on OpenSCAD and a more hours printing here you got
two figures generated with the Futuristic City Builder published a year ago.
They arebig. The black one is 160x160x202 mms and the blue tower is 120x120x295mms.
You can scaling down but may miss some minor details.
If anyone want replicate this cities in the customizer at a different scale use a rectangle base and theseeds are 220505 for the black fortress and 595568 for the ice tower. Using a smaller (or bigger) base you can get a different scaled replica.
Printed using FillamentumVertigo Grey and Crystal Clear Iceland Blue in the ANET E10 printer(courtesy from Gearbest.com)
Hope you enjoy it
Have fun!
You can buy ANET E10 here (affiliate links): EU PLUG | US PLUG | UK PLUG
Check other printers on Gearbest.com
Save time and filament using Gradual Infill in Cura slicer
20% infill -->473 gr
Gradual infill -->229 gr (saves about 250 grs. half of filament consumed!!!)
Category: Decor