Wired Earth Globe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi! Didn't find any 'Wired earths' so i do some tests in Blender. Now i have four versions. Two icospheres (simple and…
- Ocena
- 4,4 / 5
- Polubienia
- 95
- Pobrania
- 845
- Wydruki
- 7
- Wyświetlenia
- 3119
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
Hi!
Didn't find any 'Wired earths' so i do some tests in Blender.
Now i have four versions. Two icospheres (simple and smoothed) and two UV spheres (simple and smoothed again)
There is 4 files with full spheres and 8 files with the related semispheres. (Used Meshmixer for this)
Also included a STL with a stand.
Some islands dissapear ant may not be the most detailed earth you can find but the wired seas looks really good.
Take care of this one, is our home.
Have fun!
Print Settings
Printer:
BQ Prusa i3 Hephestos
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2 or less
Infill:
Doesnt matter
Notes:
Tested with PLA
I don't use supports because printing time increases too muchI only have overhanging problems printing the icosadron (not smoothed), but after cleaning look nice
At 100% size (about 5 cms diameter) you can print a full globe adding a brim or raft but for bigger sizes i recomend printing the two hemispheres and glue it
Category: Physics & Astronomy