Heart Lollipop Toppers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are Valentine's Day gifts from CeCe to her Classmates 💛🖤 They are nice little Toppers to a Sweet Treat!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Designed by japinaychi (https://www.instagram.com/japinaychi) and fatboy1271
Nozzle 0.4
Layer Height 0.2mm
Color Change at Layer 31
MatterHackers * Build PLA Pink
HATCHBOX3D * PLA White
If you're like me and have a single nozzle, non-AMS/MMU, but still want color changes, I use this in my Post Processing Script; I'll also post a screenshot:
{REPLACE "; layer" "M117 Layer"}; show layer number and Z height on LCD
{REPLACE " Z = " " Z="}; make room on LCD for text
{REPLACE "\nM117 Layer 31, Z=" "\nG1 X10 Y5\nM300 S1000 P1000\nM0\nM117 Layer 31, Z="}
I tried an experiment and didn't like the results. At the Color Change, I also reduced the Layer Height to 0.1mm for “finer details…” Using a 0.4mm Nozzle produced cleaner text at 0.2mm rather than 0.1mm and I'm good with that.
Custom CR-10S
Antclabs BLTouch
E3D Online * Revo Six
Big Tree Tech * SKR MINI E3 V3+TFT35 V3
Micro Swiss LLC * Dual Gear Bowden Extruder
Wham Bam Systems * Magnet with FYSETC Double-Sided Textured PEI Spring Steel Platform