1 / 1
Bally A-3944 Drop Target
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification of a Bally Harlem Globetrotters Drop Target ( Bally A-3944) designed to be reinforced for printing.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Quick info
- PET-G, PLA, Nylon+CF (in that order of preference)
- 100% infill
- Supports on build plate only
- The thinner the layers, the better. (0.2mm will function, I'd personally do 0.1mm)
- This design is unverified and may not function properly, if so please provide feedback
A modified version of a Bally A-3944 Wedge/Wide Top Drop Target for Harlem Globetrotters originally designed by “OutpostKodelia” on Thingiverse, for redditthrowawaykiwi on Reddit.
Design modifications
- Body thickened beneath the hole for the spring.
- Thickened the spine under the transition from wide-to-narrow.
- All perpendicular-to-plate holes made into hexes for better printing.
- Added 0.2mm filet at wide-to-narrow transition around the half-circle chin.
You may also need to sand the layer lines at the slope, as well as source a good image to print a decal for the front.
Hope it works out for ya!