Biqu H2 Mount for Ender/Pro with Klicky NG Probe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Includes backplate and dock mount for mounting H2 to stock Ender 3/Pro carriage using Klicky NG probe.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 1412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mount should work for most of the H2 series. I am using with the H2 V2S.
See https://github.com/jlas1/Klicky-Probe for details on the Klicky project. Will need to print a probe assembly. I am using Unklicky NG, but it should work with any of the NG probe bodies. The dock is slightly modified to allow for attaching along the z-axis and undocking from the x-axis. This way the dock can be mounted to the gantry frame as shown instead of having to mount to the bed. I found I could mount just below the top of the bed and lower the z-endstop so no print area is lost. Just need to make sure y-axis (bed) is behind the nozzle when homing (ie. home from a negative y position) to avoid hitting the bed. Ask if you want to see my configuration.