MC4 Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to try making an MC4 tool for work. there are no tangs for undoing the clips becuase I use ziptie cut offs
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 652
- Wydruki
- 5
- Wyświetlenia
- 3776
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Wanted to try making my own MC4 tool for work.
Tool is double sided with no tangs, because I use ziptie cut offs, at a 45*. Zipties work alot better for me even on safety mc4 connectors. V11 is printed at 6mm thick, and I'm sure going thicker might be a bit better. After making a few jumpers, the torque still feels about right.
Sorry I don't have an action shot with the tools in hand, I was at school when I made this. The NP carved into the other side is my initials.
Printed in PETG
About 8 walls and 4+ top/bottom layers,
infill 50% +