Two Hearts That Start Apart, But Belong Together (Optional Tray)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sculpture of two hearts that can be separated and given independently, and then look even better when brought together.
- Ocena
- 0 / 5
- Polubienia
- 78
- Pobrania
- 204
- Wydruki
- 0
- Wyświetlenia
- 971
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
A delightful model of two standing hearts that can initially be separated (one for each of you), and then placed together for a beautiful sculpture. Included are a couple of tray designs as well that you can use to optionally turn the sculpture into a thoughtful way to present candy, jewelry, etc.
Other notes:
- .20 mm layer height works well
- Large heart is 13 cm tall
- Curvy tray is 20 cm wide, and basic tray is 18 cm wide
- Designed to be print with a single support in the very center of each heart (i.e. use the “Paint on supports” feature, and the “Support → For support enforces only” option in PrusaSlicer)
- For a nice look, add a color change in the slicer to print the base at a different color than the hearts
- The trays may need to be rotated by 45 degrees to fit on your print bed (they should easily fit on a bed with a print area of at least 18 x 18 cm)
I've included the 3MF files that show all the settings I used in the slicer, which I'd recommend you start with (or scroll down a bit further if you want the STLs). But, for those that just want to try downloading and printing, I've also included the .gcode file I used to print the ones shown in the pictures on my Prusa Mini. I hope you enjoy!
