1 / 4
K40 Laser Tube Mount (M3 Hex Head screw cutout + Spacer)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added cutouts for hex head screws and nuts to the bigger clamp. There is a small test body for the cutouts. You can…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 927
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
Added cutouts for hex head screws and nuts to the bigger clamp.
There is a small test body for the cutouts.
You can change the cutout size in the fusion360 file. It's a parameter.
Added a spacer for the mount, to increase the height of the laser tube.
Category: Parts