1 / 3
Scratch Gauge (Streichmaß) for stainless steel ruler 2023 v3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scratch Gauge that fits a ruler 25mm wide and 0.5mm thick.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 101
- Wydruki
- 2
- Wyświetlenia
- 519
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (31)Powiązane
The scratch gauge is designed to fit one of those stainless steel rulers. A ruler 25mm wide and .5mm thick fits niceley.
Requires a M5 screw / nut combination for assembly.
The STL should already have the correct orientation for printing, just to make sure: print flat face down, rounded edges up.