Speidel Fermenter Airlock Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lid for a Speidel fermenter with a port for a Speidel airlock
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 764
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a screw on lid for a Speidel 12L HDPE fermenter that has a port for a Speidel airlock.
I really like the Speidel fermenters, but I misplaced the single bung that came with it and needed something to replace it. Making a lid seemed like a better approach to a bung anyway!
The airlock port will fit a 1" grommet (11/16" ID, 1-9/32" OD). The grommet will have some movement, this is by design so that it is possible to get it on without destroying it. It should still make a good seal, mine did during my tests.
The ‘WithORing’ variant also has a groove that will hold a G40 nitrile o-ring. The O-Ring is not strictly necessary, but would seal a bit better in theory.