1 / 6
Heavy Bowl for Whatever
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bowl is printable without supports, and has voids that can be filled to give the bowl weight. I have had success filling it with plaster of Paris when printed with abs, and with fine sand.
If filling it with fine sand you will need a funnel that fits snuggly in the 10mm hole in the bottom. Spinning it will force the sand to the edges. When no more sand will go in you will need to plug the hole with epoxy, or glue in the provided plug. You may need to scale the plug to adjust for your printers tolerances.