1 / 1
Aranet4 CO2 Monitor Desktop Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop stand for the Aranet4 CO2 monitor
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Raises the sensor about 3 inches/80 mm and tilts it back 15 degrees to allow for easier viewing.
Printing standing up - there's no other orientation to get the lip to print without using supports.
The pictured model is a draft; the final is basically the same with some rounded corners and a little more room for the sensor.