1 / 2
Icom ID-5100 Base Plate Cover (Fits Most Single Din Stereo) Ham Radio UHF/VHF
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a Lexus LX470 and wanted to place my newly acquired ID-5100 receiver in the CD-Changer slot in my center console.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 1434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
This is a friction faceplate that covers the gaps left when installing an ID-5100a into the CD changer console spot in a Lexus LX470. It can be printed on a Prusa MINI (cause that's all I have) and must be printed with supports.
I suggest
- 10-15% infill
- .20 speed
- supports on build plate only
Assembly
- I assemble it with a couple of M3 bolts and nuts(optional)
- Friction fit into the space in your spot
- The Faceplate Cable runs out the front through the relief into the console.
- Mic Lives in the center console and does not go through the faceplate.