Resealable Pouch Filling Assistant - No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a tool to assist filling resealable pouches for baby foods.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This handy little tool helps refill those refillable baby/toddler food pouches without needing three or four hands. These are the pouches I use them with but I think all the caps are roughly the same size so it should work with most brands. I've also included little C-clips which hold the pouch open while you're filling it just to make it that much easier. See the pic I posted for how it works.
As far as printing goes, I just printed them as rough and fast as possible in PLA. 0.2mm+ layer height (I think I did 0.3mm layer height with a 0.6mm nozzle) with 15% infill. It prints in the same orientation as it's used and I tried to round everything as much as possible to cut down on print time.