Secure Grip Guitar Pick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed guitar pick that is self-orienting with a secure grip… user-friendly. It can even stand on end.
- Ocena
- 4,75 / 5
- Polubienia
- 153
- Pobrania
- 1111
- Wydruki
- 7
- Wyświetlenia
- 2546
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
I printed this in Red ABS for gifts to my senior friends who are always dropping their picks. Ha. It will stand on the bedplate on its back end and print well. I then hung it in a jar for a while with Acetone until shiny and smooth. It self-orients in your hand and will not normally come out unless you hold very loose. You can print a bunch at once. You can sand/reshape the tip and smooth with acetone to get desired length. You can also scale it to a smaller size. BTW, I made one out of Nylon with Carbon Fiber and it had much better wear resistance than the ABS. It lasts forever.