1 / 5
Bambu Lab X1C P1P Spoiler / Chamber Waste recovery for debris removal — zdjęcie 1
1 / 5

Bambu Lab X1C P1P Spoiler / Chamber Waste recovery for debris removal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the base insert for Bambu Lab X1 chamber

Ocena
4,5 / 5
Polubienia
155
Pobrania
1207
Wydruki
13
Wyświetlenia
4925
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic.

Some modifications to original design : 
 

  • Only One part instead of two (rotate it at -45° on bambu plate for print) => easier to print
     
  • recover ledge to prevent waste from falling between piece and ledge
  • greater slope to facilitate extraction of wastes

 

Need supports, brim about 2mm to prevent wrap. About 1h30 with adaptative layer height

Tagi