BEER BOTTLES CARRIER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How nice it would be to bring bottles of beer as a gift for a social event. (Hey, don't drink and drive)
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 262
- Wydruki
- 1
- Wyświetlenia
- 2026
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
The carrying container is designed for 6 bottles with a diameter of 63 mm max and a height of 25 cm. The carrier is made of PLA (+) and and has of 5 parts:
Please note the attached gcode files for best results as for supports on the Top Arm edges and avoiding bridges on the Main Body.
I used 0.20 mm SPEED mode and 20% infill on all parts, except for the Arm Screw where I used 30% infill.
Main body One (1) unit. This is largest file to print, about 35 hours.
Arm Side Two (2) units
Arm Screw Two (2) units
Top Arm One (1) unit
Cap Top Two (2) units
The assembly tested for full carrying weight and size.