Infill Sampler with exchangeable Infill Testprints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Good to have the infill patterns in your hands to judge which is the best for your project.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Often I found out that my choice of infill style and infill percentage was not best. Now I can print my infill samples (30x30x5mm), just leave the top layer = 0.
I added a lot of grid patterns: 1 only, 2x1 grid, 3x4 grid, 4x4 grid and 4x5 grid. You print the Holder separately, as many as you want. You print the grid separately. Eventually you put the holder into the grid, you can flip it 180°. Then you can click the infill samples (30x30x5mm) into the holder, securely retained by little clamps. I put a sticker on the backside of each sample, so you can make your choice and flip 180° to see what it was.
Btw. you can also make little memory figures or prints and play the flip game with your kids. Up to you.
Designed with ThinkerCad, printed on MK3S+ and Voron 2.4.