Magnetic Stand for HFT Dual Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for the 18650 powered dual light on Thingiverse
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I liked the light a lot but for my use I needed a stand preferably magnetic. For the magnet holes I added short supports that print with the stand and snap out. No need for supports. Hardware is one 5mm nut, 5mm x 20mm screw, four magnets 18mm diameter x 5mm. Magnets should press in but a little glue wouldn't hurt. Had magnets for a long time probably got them from Amazon or EBay.
Generic PLA, 0.2 layer, 20% infill
Dual Light can be found on Thingiverse. Great design. Dual Harbor Freight Work/Filming Light (18650 powered) by hotbrass - Thingiverse
Note on dual light: better to use single strip light version as shown. I used LED version and had to remake back cover.