Mean Well PSU Dual-Stand (LRS350 + LRS35)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a PSU dual stand for 2 MeanWell LRS power supplies which uses the power socket (IEC) from the Creality Ender 3…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a PSU dual stand for 2 MeanWell LRS power supplies which uses the power socket (IEC) from the Creality Ender 3 original power supply.
fits:
- MeanWell LRS-350-24 (and others with the same measurements)
- MeanWell LRS-35-12 (and others with the same measurements)
notes:
- threaded inserts (M3)
- holes could be require pre-drilling (holes have 4.2mm diameter - better safe than sorry)
- 2mm additional depth for excess plastic
required materials:
- threaded inserts
- 2x M3 8x5 (power socket)
- 1x M3 6x5 (LRS-35 mounting hole / inner wall)
- screws
- 2x M3x8 (power socket)
- 2x M3x8 LRS-35 mounting
- 2x M4x8 LRS-350 mounting
- 2x M5 stand mounting (variable length)
additional notes:
Provided pictures are from the first revision with higher tolerance for PSU, reduced it from 0.8 to 0.4mm in both directions.
Additionally, I changed the side mounting hole diameter for LRS35 from M4 to M3 (error in my variables).
Due to the long print time, I stick with it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Category: 3D Printer Accessories