Slot Together Model Aircraft Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple slot together stand for model aircraft.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 529
- Wydruki
- 1
- Wyświetlenia
- 4057
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple slot together stand for model aircraft. Ours was lost so this was a replacement designed to suit the pictured model.
Fitting the two pieces together is tight, you may need to shave off a little plastic with a file or knife depending on your print quality, but this ensures that you won’t need any glue, and it should hold a good amount of weight without wobbling. The critical dimensions you may be interested in are the size of the stand tip that slots into the aircraft: It measures 6.0mm long (front to back direction of aircraft), 2.3mm wide (wing to wing direction), and 6.0mm tall as pictured.
Please feel free to make modifications to this design to suit your needs.
Full details about this project on my blog https://edditiveblog.wordpress.com/2020/01/24/3d-printed-model-aircraft-stand/
Print instructions
Category: Vehicles Summary
Print Settings
Printer Brand: Wanhao
Printer: Wanhao Duplicator i3 Plus
Rafts: No
Supports: No
Resolution: 0.2mm