Burr Stand for 2.4, 3.0 and 3.2mm Shank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Burr stand for 2.4, 3.0 and 3.2mm shank burrs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a few drill burrs for cutting and grinding. I wanted a way to bring all my burrs to a single place and neatly make them accessible. An added complication is that the shank sizes are either 2.4mm, 3.0mm or 3.2mm (1/8in).
My solution to the complication is to have a modular burr stand parts. The stands have the following capacities:
- 18 x 3.2mm shank
- 18 x 3.0mm shank
- 28 x 2.4mm shank
- 18 x 2.4mm shank
Each stand is 75mm wide by 15mm high. Stand modules securely clip together, much like jigsaw puzzles to make a train like stand.
As I find more useful burrs, my modular approach allows me to just add a stand module that matches my burr growth.
My print is made in PLA 1.75mm Aurarum Gold filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer. No print supports required.
I hope you can find this print useful, too.