petpull bottle cutter remix petg pet petb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6203 ZZ bearings. If you are pulling and cutting bottle best option is to make bottle as cylindrical as possible, then…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 328
- Wydruki
- 0
- Wyświetlenia
- 3012
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
6203 ZZ bearings.
If you are pulling and cutting bottle best option is to make bottle as cylindrical as possible, then cut bottom and start stripping it to the top.
By hand i did not need to cut top part of bottle, because i had more control over cutting process.
Bottle pet in Balkans ( Bosnia) is best printed at 255Cesius hot end and 80Celsius glass hotbed.
This plastic does not like to bee squished to glass bed, it needs breading space 0.1, 0.05 offset.
Drying filament is mandatory after pultrusion.
This design is best for cutting pet bottles, but i had some problems with it after using it so i decided to do remix and fix things that ware making problems for me. First i added front screw hole in "postavka" because when cutting bottle strip was cutting exit of "postavka" and that made cut strip have different height. Next I over sharped bearings and they did not make good contact (sharped surfaces ware not touching) so I made bottom bearing spacer modular (6mm is height in original design I needed 7mm). Last problem was that i had threaded rod (6mm used for this design) standing at 90degres and weight that was pressing bottle on "postavka" , that was problem for me because it did not do good job in making constant height of strip. So I added bottle guide at angle of 20degress towards upper bearing which makes pressure to side of "postavka" and is pressing it on "postavka" without any weight on top of bottle, strips that I got were constant after that as seen in Post-Printing pictures. Program used was Free-Cad with Part , Part-design and Mesh Workbench I uploaded those files so you can edit them to your needs.
Monero address: 83d3kbWybpUayehL3jX4YXT4gu3zxWyAKPtgKvQR996pbYRnshBGkhqdMMtvF
c4ETEjjQKwk9b5jTD6cJkRrcbfeEVieTRv
Bitcoin address: bc1q86zq72lamuc7shky26j4yyj3ml5wde088fd766
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
75%-100%
Filament: germin pla black
Notes:
I used 75% infill.
Category: 3D Printing