1 / 2
Quick Rubber Band Gun
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed this from a very simple design, 4 shoot per load, very quick print.
- Ocena
- 4,679 / 5
- Polubienia
- 253
- Pobrania
- 4187
- Wydruki
- 30
- Wyświetlenia
- 13 088
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 30) (Komentarze: 64)Remiksy (0)Kolekcje (294)Powiązane
A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden by the cover.
Version 4
- Made the “Hook” on the front larger to accommodate larger rubber bands suggested by krtecek.vrtacek.
Version 3
- Rounded the edges more.
- Added tabs that protrude out from the main body to holes in the cover, which helps with glueing, it might hold the cover snuggly, but it is still suggested to glue the cover on.
Print Setting
Layer Height 0.2mm
Infill 15%
No Brim* (If your printer have warping issues, use a small brim.)
No Supports
This model was designed in MM, so if it is extremely small in the slicer, than scale it up by 1000%