Aqara water leak sensor floater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a swimmer mount for an aqara water leak sensor.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 106
- Wydruki
- 2
- Wyświetlenia
- 1352
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This floating mount for the Aqara water leak sensor can be used to monitor the water level in a tank. By attaching the mount to the sensor, it becomes a convenient tool for determining if the tank is full or almost empty. The mount is designed to float on top of the water, and detects when the water level is above ~35mm. This is a simple solution for keeping track of the water level in your tank.
Note: It is important to print the base of the mount with 100% infill to ensure that the device stays upright in the water.
I tested this with the Model SJCGQ11LM. It is press-fit in the Print.