back bone and new inset shelf panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
quick cutout and addition to provide a bit of additional support for the right side of the BU faceplate on the P1P
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model is great, but i was getting a bit of sagging of the right side of the model once installed.
This remix takes the shelf insert and adds a supporting backbone in the back and the backbone model.
how to fit: install the main surround, slot the backbone into the insert, slide the backbone into the main surround and slide the insert/backbone left to fit, click in the central brace piece.
dissaembly: use a hefty chunk of blutac and pull the central brace off, repeat for the insert from the right side.
Printing: I printed the backbone at 50% and 6 perimeters, the insert was 15% infill and 5 perimeters.