Heart Photo Stand (5x7)

Heart Photo Stand (5x7)

This photo stand was created to be printed without supports and designed to avoid the need to swap filament colors mid-print. All parts should fit snug into place and stay without any adhesives. If you're looking to make a more permanent print, super glue is going to be your best friend.

Please feel free to remix this as you please, I've included the .f3d file. All I ask is that you give me credit as the original creator. Also, if you end up printing this, please share some photos of it and let me know what you think!

Fusion 360 Preview: https://a360.co/3jyO1MD

---

Print Settings

Everything was printed with a 0.4mm nozzle, 0.2mm layer height, 15% infill at 240mm/s on an AnkerMake M5.

I've included .stl's with a 10mm brim and 3mm skirt for the Picture Frame and the Base. If you have issues with warping or adhesion, try the files with the brim.

---

Part List (by color)

The parts are broken down by color below. I recommend printing the combined .stl's for the Red and White parts to save time.

Red

• Cloud Hearts (Red).stl
• a-Small Heart Inside (Red).stl
• b-Large Heart Outside (Red).stl
• Red Parts.stl (Combined .stl for easier printing)

White

• Cloud Background (White).stl
• a-Small Heart Outside (White).stl
• b-Large Heart Outside (White).stl
• White Parts.stl (Combined .stl for easier printing)

Black

• Cloud Shell (Black).stl

Cool Gray

• Base - 5x7 (Cool Gray).stl
• Base with brim - 5x7 (Cool Gray).stl

Acid Blue

• Picture Frame - Back 5x7 (Acid Blue).stl
• Picture Frame - Back with Brim 5x7 (Acid Blue).stl
• Picture Frame - Front 5x7 (Acid Blue).stl
• Picture Frame - Front with Brim 5x7 (Acid Blue).stl

---

Filament Used

---

Instructions

1. Print the Red Parts, White Parts, Cloud Shell, Base and Picture Frame (with or without brim).
2. Put the cloud together using the following steps:
   1. Put Cloud Hearts (Red).stl into Cloud Shell (Black).stl
   2. Put Cloud Background (White).stl on top of Cloud Hearts (Red).stl
   3. Put Cloud Shell (Black).stl into Base - 5x7 (Gray).stl
3. Put a-Small Heart Inside (Red).stl inside of a-Small Heart Outside (White).stl and then into Base - 5x7 (Gray).stl
4. Put b-Large Heart Outside (Red).stl inside of b-Large Heart Outside (White).stl and then into Base - 5x7 (Gray).stl
5. Put photo in Picture Frame - Back 5x7 (Acid Blue).stl then put Picture Frame - Front 5x7 (Acid Blue).stl on top and use pressure to snap the picture frame together.
6. Put the completed Picture Frame into Base - 5x7 (Gray).stl