1 / 9
Merten M-Smart Double frame for Merten and Aqara Opple — zdjęcie 1
1 / 9

Merten M-Smart Double frame for Merten and Aqara Opple

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Merten M-Smart Double frame to hold one standard merten switch and one Aquara Opple Switch

Ocena
5 / 5
Polubienia
4
Pobrania
38
Wydruki
1
Wyświetlenia
858
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description

I was in search for a simple possibility to add Aquara Opple switches into my Merten M-Smart switch program here in the house. Unfortunately I couldn't find one. 

I have no idea about how to design so I just thought I try out to combine stuff in Tinkercad and to my own surprise it worked. :)

So I took the model from jarrah and cut away anything but the inner core and implanted it inside the model from kampfschlaefer 

I created two versions - one where the Aquara Opple sits above the Merten switch and one where it sits below it.

In addition to print out the model you need two magnets of size 12 x 6 x 3mm. These can either be purchased or taken from the orginial wall holder of the Aquara Opple. I would recommend the first option, as you then can use the original wall holder anytime just in case you need it.

This is one possible source for the 12 x 6 x 3mm neodymium magnets: https://s.click.aliexpress.com/e/_DeL6ApF

UPDATE (2023-09-24):
It seems that there are more than one seller on Aliexpress offering this size. Do a search for „block magnet 12x6x3“ on the Aliexpress page to find the best offer for you.
 

Unfortunately the neodymium magnets in 12 x 6 x 3mm are much more expensive than standard sizes.

You can also use size 10 x 5 x 3mm (e.g. https://s.click.aliexpress.com/e/_DFFI3St)- but then you have to take care when gluing stuff together, so the magnets are in the right place.

 

Print Settings

Supports

Yes

Resolution

0.12 - 0.16 

Infill

25%

 

Tagi