1 / 2
Kingroon KP3S v3 belt tensioner for x-axis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tighten x-axis belt with a metric m4-screw. Simple design.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 209
- Wydruki
- 2
- Wyświetlenia
- 1170
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (2)Kolekcje (40)Powiązane
I wanted something simple to tighten the x-belt. Keep in mind, this is a very tight fit. You might need to play around to make it fit. I printed it using PLA with so many walls, that its actually a 100% infill.
The screw hole is 3.8mm in diameter with no threads. So you can screw in whatever fits. And it should not have leeway, but cut its own threads to make sure there is enough friction to keep the screw from turning from vibrations.
