Parameterized Push Latch Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here it is, the parameterized version of the push latch case
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 249
- Wydruki
- 0
- Wyświetlenia
- 1368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is the parameterized version of the push latch case. You will need fusion360 to make changes to the parameters.
The minimum possible size is 41mmx11mmx28mm (LxWxH)
I would recommend extending the length and width over height, but if you need to adjust the height it should be okay. The spring doesn't change to the height but it does to changes in width.
To change parameters open the F3D file in fusion 360, navigate to:
Modify → Change Parameters
The InsideWidth, InsideLength, and InsideHeight are adjustable in the expression column. Be sure to stay under the minimum sizes for each feature
This model also contains the old “arm” model so be sure print the improved arm instead!